Tiny Tree and Teeny Trees

Tiny Trees

I’m decorating for Christmas and wanted to change out my Tiny Quilt from Autumn to Christmas, but then got wondering how a teeny-weeny quilt would look, so got busy.  These little quilts fit onto plastic picture frames:

I have two free patterns for you here, but please remember the drill: Don’t print off umpteen for your next class, or guild meeting swap or your mother.  Please send them here to get their own pattern.

The teeny tree (4×6″) pattern is in this downloadable PDF file:Teeny Christmas Tree quilt

The tiny tree (8×10″) pattern is in this downloadable PDF file:Tiny Christmas tree quilt

As you can see from the samples I made up, I play fast and loose with some of the placement of pieces, really using them more as a guideline for cutting, than anything else (although I did cut out the tree exactly).

Tiny Tree_1

Cut out all the pieces for the pattern you’ve chosen.  As I noted above, sometimes I used the pattern (shown here before I added the labels) as sort of a general guidelines.  You need an accurate tree, and a nice straight edge where you’ll sew it to the tree (the diagonal line in the photo, above).Tiny Tree_2

I sewed the “sky” pieces to the sides of the trunks then trimmed the edge that would attach to the tree.  More detailed tutorial is also on my OTHER Christmas Tree block tutorial, which is sized somewhere in between these two tree sizes. (I should open up a Christmas Tree lot with all these patterns.)Tiny Tree_3

Sew the “right” side onto the tree.  Make sure you keep the marked top triangle point pointing upwards.

Tiny Tree_4a

Trim any stray areas (above), then add the other side.

Tiny Tree_5

Straighten out the bottom of the tree assembly.  Center, then sew on the tree-trunk unit, pressing seam towards tree (so it looks like the trunk is under the tree).Tiny Tree_6a

Now to add the snowdrifts on the little tree.  On the left, I sort of place that wedge-shaped piece, determine the angle but flipping it up and down (on the right).  When I have the angle I like, flip it back up so right sides are together, and stitch along the upper edge.  Trim.Tiny Tree_6b

Repeat for lower snowdrift.  Trim excess.

Tiny Tree_7
For the bigger tree, I added on 2″ strips to frame the tree.  It needed something to jazz it up, so I got rid of the bottom strip on the pattern and just used strips all around.Tiny Tree_7a

Layer with batting and backing and quilt.  I did a meander in the sky area around the trees, then some straight lines in the snowdrift on the teeny tree, and some straight lines in the frame around the bigger tree:

Tiny Tree_8a

I also quilted some swirls in the center of the tree.Tiny Tree_8b

Time to trim.  The teeny trees trim to 4-3/4″ by 6-1/2″ and the larger tree is trimmed to 8-3/4″ by 10-1/2.”

Tiny Tree_9

Make a sleeve for the back by cutting a piece the same size as the quilt top, but then hem the lower edge, turning it up twice and top-stitching.  I know it’s hard to see in this print, but again, feel free to check out the other tutorials of tiny quilts.Tiny Tree_10a

I brought out my Blythe doll and one of my husband’s nutcrackers to pose by the quilts.

Tiny Tree_10bTiny Tree_110c

Looks like Blythe has the hots for the Santa skier. And here I thought she’d go for the more traditional guy:

Blythe and King

He does look a little formal.  Hmmm.  Evidently not her type.

Okay, that’s enough–I’m off to sew!

(Buttons added!)